Technical data lamella geometry | POLAR KÄLTETECHNIK

Technical data

System 5050-12 | 5025-12 | 5050-15 | 5025-15 | 3535-10 | 3518-10 | 2522-8

Lamella geometry of heat exchangers

System 5050-12

Pipe spacing RT x RR	50 x 50 mm aligned
Lamella spacing	2 - 10 mm
Pipe material	Copper (CU-DHP), copper inside ribbed, tinned copper
Pipe dimensions	12 x 0.42 \| 12 x 0.8 mm
Lamella material	Aluminium, alu-epoxy, AIMg3, copper
Lamella thickness	0.18 - 0.25 mm
End plates	Aluminium, galvanized steel, copper, stainless steel
End plates thickness	1.0 \| 1.5 \| 2.0 \| 3.0 mm
Dimensions H x B	50 - 2000 x 50 - 2000 mm
Dimensions S \| T \| A	40 \| 50 \| 200 - 4500 mm

System 5025-12

Pipe spacing RT x RR	50 x 25 mm offset
Lamella spacing	2 - 5 mm
Pipe material	Copper (CU-DHP), copper inside ribbed, tinned copper
Pipe dimensions	12 x 0.42 \| 12 x 0.8 mm
Lamella material	Aluminium, alu-epoxy, AIMg3, copper
Lamella thickness	0.18 - 0.25 mm
End plates	Aluminium, galvanized steel, copper, stainless steel
End plates thickness	1.0 \| 1.5 \| 2.0 \| 3.0 mm
Dimensions H x B	50 - 2000 x 25 - 2000 mm
Dimensions S \| T \| A	40 \| 50 \| 200 - 4500 mm

System 5050-15

Pipe spacing RT x RR	50 x 50 mm aligned
Lamella spacing	2 - 10 mm
Pipe material	Copper (CU-DHP), copper inside ribbed, tinned copper, stainless steel
Pipe dimensions	15 x 0.5 \| 15 x 1.0 mm
Lamella material	Aluminium, alu-epoxy, AIMg3, copper
Lamella thickness	0.18 - 0.25 mm
End plates	Aluminium, galvanized steel, copper, stainless steel
End plates thickness	1.0 \| 1.5 \| 2.0 \| 3.0 mm
Dimensions H x B	50 - 2000 x 50 - 2000 mm
Dimensions S \| T \| A	40 \| 50 \| 200 - 4500 mm

System 5025-15

Pipe spacing RT x RR	50 x 25 mm offset
Lamella spacing	2 - 5 mm
Pipe material	Copper (CU-DHP), copper inside ribbed, tinned copper
Pipe dimensions	15 x 0.5 \| 15 x 1.0 mm
Lamella material	Aluminium, alu-epoxy, AIMg3, copper
Lamella thickness	0,18 - 0,25 mm
End plates	Aluminium, alu-epoxy, AIMg3, copper
End plates thickness	1.0 \| 1.5 \| 2.0 \| 3.0 mm
Dimensions H x B	50 - 2000 x 25 - 2000 mm
Dimensions S \| T \| A	40 \| 50 \| 200 - 4500 mm

System 3535-10

Pipe spacing RT x RR	35 x 35 mm aligned
Lamella spacing	2 - 10 mm
Pipe material	Copper (CU-DHP), copper inside ribbed, tinned copper, stainless steel
Pipe dimensions	10 x 0.4 \| 10 x 0.7 mm
Lamella material	Aluminium, Alu-epoxy, AIMg3, copper
Lamella thickness	0.18 - 0.25 mm
End plates	Aluminium, galvanized steel, copper, stainless steel
End plates thickness	1.0 \| 1.5 \| 2.0 \| 3.0 mm
Dimensions H x B	35 - 2100 x 35 - 2100 mm
Dimensions S \| T \| A	25 \| 35 \| 200 - 4500 mm

System 3518-10

Pipe spacing RT x RR	35 x 17,5 mm offset
Lamella spacing	2 - 5 mm
Pipe material	Copper (CU-DHP), copper inside ribbed, tinned copper
Pipe dimensions	10 x 0.4 \| 10 x 0.7 mm
Lamella material	Aluminium, Alu-epoxy, AIMg3, copper
Lamella thickness	0.18 - 0.25 mm
End plates	Aluminium, galvanized steel, copper, stainless steel
End plates thickness	1.0 \| 1.5 \| 2.0 \| 3.0 mm
Dimensions H x B	35 - 2100 x 17.5 - 2100 mm
Dimensions S \| T \| A	25 \| 35 \| 200 - 4500 mm

System 2522-8

Pipe spacing RT x RR	25 x 22 mm offset
Lamella spacing	2 - 4.5 mm
Pipe material	Copper (CU-DHP), copper inside ribbed, tinned copper
Pipe dimensions	8 x 0.3 \| 8 x 0.46 mm
Lamella material	Aluminium
Lamella thickness	0.18
End plates	Aluminium, Stahl verzinkt, Kupfer, Edelstahl
End plates thickness	1.0 \| 1.5 \| 2.0 \| 3.0 mm
Dimensions H x B	25 - 2000 x 22 - 520 mm
Dimensions S \| T \| A	20 \| 30 \| 200 - 4000 mm

Downloads

Technical data

5050-12
5025-12
5050-15
5025-15

to PDF

Technical data

3535-10
3518-10
2522-8

to PDF